You are here: Home / News

NEWS AND EVENTS

2021
DATE
12 - 05
Self-regulating valve anti-plug anti-card six methods

1, Love wash method: welding slag, rust, slag and other piping in the throttle, guide parts, under the valve cover to balance the hole caused by blockage or stuck so that the valve surface, the guide surface of the resulting injury and scratches . In this case, you must uninstall the cleaning, remove the slag material, such as the sealing surface is also damaged should be ground; at the same time the bottom plug open to flush away from the balance hole into the valve cap slag material, and the...

Read More
2021
DATE
12 - 01
AC contactor maintenance methods

(A) The contactors in use in the stent by repeated heavy blow, if the material is poor or poor manufacturing, easy to break the stent; In addition, the shaft hole with too loose, the hole to be collision, the stent is also easy to damage, therefore, asked the contactor shaft Hole to slide with, do not be too loose or too tight. If the shaft is worn, it should be promptly replaced, otherwise the bracket will be damaged. (B) bracket tie column can not work. The reason is: 1. Shaft hole with too...

Read More
2021
DATE
11 - 01
What is a waterproof connector

Introduction: The connector is CONNECTOR. Domestic also known as connectors, plugs and sockets, generally refers to electrical connectors, devices that connect two active devices to transmit current or signals. It is widely used in detection instruments, electronic instrumentation, electronic machinery, aviation, communications , navigation, computers, LED lamps, automobiles, construction machinery, electromechanical, transmission control systems, electrical electrical systems, industrial...

Read More
2021
DATE
10 - 18
The working principle of the solid state relay explains the characteristics of the solid state relay

Solid State Relay (SSR) is a non-contact switch composed of microelectronic circuits, discrete electronic devices, and power electronic power devices. The isolation between the control terminal and the load terminal is realized by the isolation device. The input of the solid state relay uses a small control signal to directly drive a large current load. 1. What is a solid state relay? Solid state relay is a new type of non-contact switching device composed entirely of solid electronic...

Read More
2021
DATE
09 - 10
Terminal marketing and pre-terminal marketing

As we all know, wooden doors are industries with low attention. Consumers generally only study wooden door related information when they are decorating or buying a house. This determines that the wooden door enterprises should attach great importance to each target customer entering the exhibition hall, and strive to convert him into their own users; and directly face the consumer's terminal, shouldering the heavy responsibility, every detail determines whether it is successful or not. With the...

Read More
2021
DATE
04 - 14
The new AC contactor was successfully developed

After many repeated trials, we have successfully developed this new type of AC contactor, welcome new and old customers to come to contact.

Read More
  • Total 4 pages  Go to Page
  • Go
BOND ELECTRIC is a leading manufacture and exporter of quality products for all kind of industrial control products.

Quick Links

CATEGORY

Contact Us

WhatsApp: +8615888590025
Phone: +86-15888590025
Tel: +86-574-87664855
E-Mail: sales@ac-contactor.cn
Address: No.169,Changyang East Road, Hongtang, Jiangbei, Ningbo, 315033, China
 
Copyright 2025 Ningbo Bond Industrial Electric Co., Ltd. All rights reserved.